Johnson Engine Technology, Inc.™
T.(401)596-9507
F.(401)596-6984
(9am-6pm EST)
| HOME | PARTS | SERVICE |
| Dyno Tuning and Fuel Mapping |  |
GET THE LATEST IN FUEL INJECTION MAPPING!! WE NOW HAVE THE SOFTWARE THAT ENABLES US TO MAP YOUR ORIGINAL ECU. READ THE FOLLOWING TESTIMONIAL THEN CALL AND ASK US ABOUT THIS TODAY!
| Hello Bob I just arrived home since I left your shop. It's 1:00 AM. You gave me a totally new and different motorcycle. I can't say enough, I'm speechless which is not like me. ..Throttle reponse is very impressive. It is hard to believe it is the same motor. The sound from the exhaust is outstanding. I wouldn't call it noise. I would call it a tuned to perfection opera of power. I rode with a few friends tonight who also have Road Kings and they were amazed. I let them ride the bike and they could not believe the difference. They all have your business card. It was a pleasure to meet you and your crew. I look forward to doing bussiness with you in the near future. Thank You again. Mike Archetto |
|
LABOR |
J.E.T.
Labor # |
Cost |
| Dyno Tune (set timing, check jetting, 3 Runs) | DT.651 |
69.00 |
| Rate After 3 Runs | DT.652 |
hourly
rate (80/hr) |
| Install J.E.T. Fuel Map directly into your OE ECU using Direct Link | DT.653 |
200.00 |
| Install Gas Analyzer for fuel injected motorcycles (we can tell you how much oxygen is coming out of your tail pipe) | DT.654 |
100.00 |
| Adjust existing fuel map | DT.655 |
hourly rate (80/hr) |
| Develop fuel map for vehicle without J.E.T. components on it using Direct Link | DT.658 |
hourly rate (80/hr) |
| Modify Baffles | DT.656 |
80.00 |
| TechnoResearch ECU key | DT.657 |
279.00 |
| Custom Exhaust | EX.1300 |
530.00 |
Johnson Engine Technology, Inc. runs Dyno Jet 250 with WinPep software, Eddy Current and DynoWareEX+ Dyno Hardware stack, stacked with an Atmospheric Sensing module, RPM module, Dynamometer Input/Output module, CPU module, as well as an Air/Fuel ratio module. Our ynamometer sets us even farther above the rest. We are able to better assimilate road conditions, increase your power, lower your vibration, and increase the reliability of your motorcycle. Make an appointment for your bike today!
As quoted from Dyno Jet's web site, "The MODEL 250 Load Control Dynamometer is perfect for engine break-in, durability testing and fuel injection mapping. It's like getting two Dyno's in one package as all the features of the Dyno Jet Inertia Dynamometer are maintained."
Below are some links to Dynojet. These pages will give you an idea what our new Dynojet 250 can do for you:
-
the DynoWareEx+ Dyno Hardware (What are all those modules for?)
Service
Air Cleaners | Camshafts | Carburetors | Crankshafts | Cylinders | Cylinder Heads | Dyno Tuning | Engines | Intake Manifolds | Oils | Pistons | Push Rods
To The Top | Links | To Dyno Runs | HOME | Email J.E.T
"We back our work with performance...not excuses!"
Copyright 2002 Bob Johnson
God is blessing
America!